Convex Closeboard Gate
Graceful Curves with Superior Strength
Transform your property with our convex closeboard gate, where classic design meets contemporary craftsmanship. Featuring a gracefully arched top, this gate combines sophisticated aesthetics with robust security and privacy.
Each convex closeboard gate is custom-built to your precise width and height specifications, ensuring a perfect fit for your entrance. The gate is constructed with a durable, fully framed design, using 4x2 timber for the horizontal rails and 3x2 timber for the vertical supports. This strong framework provides stability and strength, accommodating hinges, locks, and bolts with ease.
The standout feature of this gate is its convex (arched) top, which not only adds a refined curve to the traditional closeboard design but can also provide additional height if your existing fence is a bit low. The height of the gate is measured from the bottom of the gate to the highest point of the arch, allowing for a graceful curve that enhances both the appearance and functionality of your entrance.
The gate is clad with closeboard (featheredge) panels, which are tapered and overlapped to create a dense, impenetrable barrier. This overlapping design ensures excellent privacy and protection against weather and intruders.
Constructed from tanalised pressure-treated timber sourced from sustainable forests, the convex closeboard gate is designed to resist weathering, rot, and pests. The pressure treatment ensures long-lasting durability, maintaining the gate’s strength and appearance through the years.
All gates are made to the exact width and height you need.
To order firstly select the height you require.
Gates can be made lower than the height stated, so for example if you need a gate 160cm high- choose the 180cm height.
Then choose the width of gate you need.
Again gates can be made narrower than the width chosen, so for example if you need a gate 112cm wide- choose the 120cm width. Remember to take in account swing and hinge room. We recommend 15mm – 20mm.
Next select the hinge side, looking at the gate from the front. The hinge side determines the direction of the bracing at the back of the gate.
Should you need any help or advise please message us using the contact us page.
DELIVERY
We offer local, as well as being able to arrange nationwide delivery. Please use our Request a delivery quote page should delivery be required.
FITTING SERVICE
Local fitting service available. Please go to our Contact Us page and send us a message stating your postcode and requirements.
Graceful Curves with Superior Strength
Transform your property with our convex closeboard gate, where classic design meets contemporary craftsmanship. Featuring a gracefully arched top, this gate combines sophisticated aesthetics with robust security and privacy.
Each convex closeboard gate is custom-built to your precise width and height specifications, ensuring a perfect fit for your entrance. The gate is constructed with a durable, fully framed design, using 4x2 timber for the horizontal rails and 3x2 timber for the vertical supports. This strong framework provides stability and strength, accommodating hinges, locks, and bolts with ease.
The standout feature of this gate is its convex (arched) top, which not only adds a refined curve to the traditional closeboard design but can also provide additional height if your existing fence is a bit low. The height of the gate is measured from the bottom of the gate to the highest point of the arch, allowing for a graceful curve that enhances both the appearance and functionality of your entrance.
The gate is clad with closeboard (featheredge) panels, which are tapered and overlapped to create a dense, impenetrable barrier. This overlapping design ensures excellent privacy and protection against weather and intruders.
Constructed from tanalised pressure-treated timber sourced from sustainable forests, the convex closeboard gate is designed to resist weathering, rot, and pests. The pressure treatment ensures long-lasting durability, maintaining the gate’s strength and appearance through the years.
All gates are made to the exact width and height you need.
To order firstly select the height you require.
Gates can be made lower than the height stated, so for example if you need a gate 160cm high- choose the 180cm height.
Then choose the width of gate you need.
Again gates can be made narrower than the width chosen, so for example if you need a gate 112cm wide- choose the 120cm width. Remember to take in account swing and hinge room. We recommend 15mm – 20mm.
Next select the hinge side, looking at the gate from the front. The hinge side determines the direction of the bracing at the back of the gate.
Should you need any help or advise please message us using the contact us page.
DELIVERY
We offer local, as well as being able to arrange nationwide delivery. Please use our Request a delivery quote page should delivery be required.
FITTING SERVICE
Local fitting service available. Please go to our Contact Us page and send us a message stating your postcode and requirements.
Graceful Curves with Superior Strength
Transform your property with our convex closeboard gate, where classic design meets contemporary craftsmanship. Featuring a gracefully arched top, this gate combines sophisticated aesthetics with robust security and privacy.
Each convex closeboard gate is custom-built to your precise width and height specifications, ensuring a perfect fit for your entrance. The gate is constructed with a durable, fully framed design, using 4x2 timber for the horizontal rails and 3x2 timber for the vertical supports. This strong framework provides stability and strength, accommodating hinges, locks, and bolts with ease.
The standout feature of this gate is its convex (arched) top, which not only adds a refined curve to the traditional closeboard design but can also provide additional height if your existing fence is a bit low. The height of the gate is measured from the bottom of the gate to the highest point of the arch, allowing for a graceful curve that enhances both the appearance and functionality of your entrance.
The gate is clad with closeboard (featheredge) panels, which are tapered and overlapped to create a dense, impenetrable barrier. This overlapping design ensures excellent privacy and protection against weather and intruders.
Constructed from tanalised pressure-treated timber sourced from sustainable forests, the convex closeboard gate is designed to resist weathering, rot, and pests. The pressure treatment ensures long-lasting durability, maintaining the gate’s strength and appearance through the years.
All gates are made to the exact width and height you need.
To order firstly select the height you require.
Gates can be made lower than the height stated, so for example if you need a gate 160cm high- choose the 180cm height.
Then choose the width of gate you need.
Again gates can be made narrower than the width chosen, so for example if you need a gate 112cm wide- choose the 120cm width. Remember to take in account swing and hinge room. We recommend 15mm – 20mm.
Next select the hinge side, looking at the gate from the front. The hinge side determines the direction of the bracing at the back of the gate.
Should you need any help or advise please message us using the contact us page.
DELIVERY
We offer local, as well as being able to arrange nationwide delivery. Please use our Request a delivery quote page should delivery be required.
FITTING SERVICE
Local fitting service available. Please go to our Contact Us page and send us a message stating your postcode and requirements.
